Recently we were called out to the Sun Farms community in Queen Creek. The customer reported that their dishwasher had no power at the control panel. When we arrived we found that the wall outlet was fine but the dishwasher would not respond to any commands. We checked for voltage at the terminal block and it showed 120 V as it should. Then we opened up the dishwasher panel where the control board is located in tested the thermal fuse for continuity, the thermal fuse was shorted so we replaced the dishwasher thermal fuse and tested. Problem solved, if your dishwasher has no power at the control board give us a call at 602-412-3133.