Recently we were called out to the Cortina estates community in Queen Creek to check out a Frigidaire refrigerator not cooling problem. When we arrived, we tested for voltage at the compressor as it was not running. We tested the electrical windings to verify the compressor was still good because it was getting power the windings but was still not working, The windings failed the test and were not good so we replaced the compressor, problem solved. If your refrigerator is having similar problems please call us at 602-412-3133.
Other models that may experience this type of problem:
Thought it might be kind of fun for you to see what a dryer looks like disassembled. We were contacted by a regular customer in Castle gate in San Tan Valley, their dryer sounded like a dragster going down a ¼ mile stretch of road. Let me put it this way, it was hard to avoid the noise and let it go. Loud noises in dryers whether a GE dryer, a Maytag dryer or a Whirlpool dryer almost always are caused by an internal component. A Dryer roller support, a dryer idler pulley, a dryer bearing, any of these items will get very loud very quick when they are starting to fail. On this particular unit the dryer rollers, dryer idler pulley and dryer belt were replaced. Ready for the next 15-20 years of service. If your dryer is loud and you want to know why give us a call at 602-412-3133. Other models with this type of problem are listed below.
Whirlpool Duet Model Numbers:
YOUTUBE Do it yourself Link https://youtu.be/3_RwL5Dzozw
So we got a call about a Maytag refrigerator not cooling down properly on the refrigerator side only, the freezer was doing fine. The call was in Copper Basin right down the street from us so we popped in pretty quickly to see what might be the problem. When we arrived we found a ton of frost build up on the inside of the back panel in the freezer. When this happens it means something within the defrost system has failed. In these situations we have to teardown the inside of the freezer compartment to access the components like the defrost heater and defrost bi-metal. In this case the culprit was the adaptive defrost control board, normally called the motherboard. We defrosted the unit and replaced the control board. Operation now normal, I love when a repair cooperates. If you are experiencing these types of problems with your Maytag refrigerator please call us at 602-412-3133. We proudly service the Queen Creek, San Tan Valley, Florence, Gilbert and Chandler areas. Other Maytag refrigerators that may experience this type of problem are listed below.
YOUTUBE Do it yourselt Link
We were out in the circle cross ranch community in San Tan Valley inspecting a whirlpool range for a burner not working. When we arrived we tested for 240 V at the wall outlet which tested good. We checked the terminal block all the way up to the control board for proper voltage and that was also good. We then checked the range infinite switch for power output. The infinite switch failed so we replaced it and problem solved. If your range is having similar problems please call us at 602-412-3133.
Other Whirlpool Electric Ranges that may have this problem: